隧道光亮度監測儀是隧道照明調控的關鍵設備，它采用高精度光電傳感器，實時精準測量隧道內部各區域的光亮度，測量范圍寬泛，精度可達0.1cd/m2，響應迅速。設備具備強大的環境適應性，能在惡劣條件下穩定工作，防護等級高。同時，它支持多種通信接口，可與控制系統無縫對接，實現數據實時傳輸與遠程監控，為隧道照明智能調節提供可靠依據，有效提升行車安全與節能效果。

隧道光亮度監測儀能滿足整個隧道照明控制的要求，預置控制模式的控制器根據光源測量值按預設參數自動進行切換照明開關，為隧道照明提供了最佳值。它的設計符合CIE關于隧道照明測量的要求，并能滿足《公路隧道通風照明設計規范》，而且它的整體設計能滿足野外惡劣的工作環境地要求。

安裝方式：

隧道光強度監測儀安裝在隧道內指定區域的墻壁上，為了避免因事故或汽車殘骸對其的損傷，需安裝在4m左右的高度，距隧道入口大于10m的適當位置。安裝在隧道外高度距路面4m左右，距隧道入口120—200m左右的適當位置。具有高可靠性和低維護量.最新微處理器技術，數字化運行，安裝調試簡易。

The tunnel luminance monitoring instrument is a key device for tunnel lighting control. It uses high-precision photoelectric sensors to accurately measure the luminance of areas inside the tunnel in real time. The measuring range is wide, and the accuracy can reach 0.1cd/m2, with a quick response. The equipment has environmental adaptability and can operate stably under harsh conditions. It has a high protection level. At the same time, it supports a variety of communication interfaces and can be seamlessly connected the control system to achieve real-time data transmission and remote monitoring, providing reliable basis for intelligent regulation of tunnel lighting and effectively improving traffic safety and energy saving effects